Actiontec 1520-4 — DSL Modem for Microsoft Windows

Links:  PPPoA | PPPoE | 1520 Installation | 1524 Installation |

 

  Bridged Configuration for the Actiontec 1520-4 DSL Modem:

To bring up the Actiontec configuration interface do the following:

Open your browser.
Address:  Enter the gateway address http://192.168.0.1.
Click the Enter key.

 

Set Up / Configuration:

In the left-hand column, click the Non-Windows Setup link.

 

A new screen appears.

Scroll down to the ISP Protocol section.

Select the option RFC1483 Bridged.

 

Scroll down to the IP Configuration section.

Select the option Static.

IP  =  Enter the IP address assigned to you by your Internet service provider.
Subnet  =  Enter the routed subnet mask.
Gateway  =  Enter the gateway address of the router.

 

Scroll down to the DNS Configuration section.

Select the option Static.

Primary DNS  =  Enter the preferred DNS address of 209.210.176.8.
Secondary DNS  =  Enter the alternate DNS address of 209.210.176.9.

Click the Save and Restart button.

 

A new screen appears.

Click the Save and Restart button.

 

That's it.  The router has been configured for Bridged mode.  You're ready to surf the Internet.

 

Links:  Return to top |