Actiontec 1520-4 — DSL Modem for Microsoft Windows

Links:  Bridged | PPPoE | 1520 Installation | 1524 Installation |

 

  PPPoA Configuration for the Actiontec 1520-4 DSL Modem:

To bring up the Actiontec configuration interface do the following:

Open your browser.

Address:  Enter the gateway address http://192.168.0.1.

Click the Enter key.

 

Set Up / Configuration:

In the left-hand column, click the Non-Windows Setup link.

 

A new screen appears.

Scroll down to the ISP Protocol section.

Select the PPPoA option.

ISP Username  =  If your ISP provided you with a username, enter it in the field provided.  If not, leave this field blank.
ISP Password  =  If your ISP provided you with a password, enter it in the field provided.  If not, leave this field blank.

 

Scroll down to the IP Configuration section.

Select the option Dynamic.

 

Scroll down to the DNS Configuration section.

Select the option Static.

Primary DNS  =  Enter the preferred DNS address of 209.210.176.8.
Secondary DNS  =  Enter the alternate DNS address of 209.210.176.9.

Click the Save and Restart button.

 

A new screen appears.

Click the Save and Restart button.

 

That's it.  The router has been configured for PPPoA mode.  You're ready to surf the Internet.

 

Links:  Return to top |